Commission III : Resistance welding, Solid state welding and Allied joining process (IIW 2017)

1) III-1804-17 A novel friction-based welding process to join Al/Cu bimetal composite tubes: Formation mechanism and bonding characterizations, W. Li, W. Yansong, Q. Wen, X. Yang and Q. Chu (China)

2) III-1802-17 Realization of different aluminium/steel-hybrid joints through ultrasound enhanced friction stir welding (USE-FSW), M. Thomä and G. Wagner (Germany)

3) III-1785-17 Mechanical properties and microstructural characteristics of friction-spot welded Al-Cu dissimilar joints, J. Shen, M.E.B. Cardillo, J.F. dos Santos (Germany)

4) III-1809-17 Study on interfacial morphologies of the joint between AA1060 and SS321 in magnetic pulse welding, S. Su, S. Chen, J. Xiao, P. Wei, C. Kan, L. Wang (China)

5) III-1844-17 Similar and dissimilar resistance spot weldability of multilayer advanced high strength steels, S. Wei, S. Lu (China)

6) III-1819-17 Texture Evolution and Plastic Deformation Mechanism in Magnetic Pulse Welding of Dissimilar Al and Mg Alloys, X. Jiang and S. Chen (China)

7) III-1829-17 Copper-Mild Steel and Aluminium-DP 780 Steel Dissimilar Material Joining, Magnetic Pulse Technique, S. Patra, P. Ghosh, S. Chatterjee, M. Shome (India)

8) III-1830-17 Fracture mechanisms of Al/steel resistance spot welds and effects of Fe2Al5 growth on mechanical property, N. Chen, M. Wang, H. Ping Wang, Z. Wan, B. E Carlson (China)

9) III-1836-17 Dissimilar of FSW of Steel and Magnesium Alloys (Immiscible Combination), H. Fujii, H. Kasai and Y. Morisada (Japan)

10)  III-1823-17 Effects of post-weld heat treatment on microstructure and mechanical properties of double pulse welded advanced high strength steel, P. Eftekharimilani, E. van der Aa, M.J.M. Hermans, I.M. Richardson (Netherlands)

11) III-1788-17 Servo-controlled projection welding of vehicular air-condition control valve, H.S. Chang (Korea), H. Lin (China) and M. Raash (Mongolia)

12) III-1791-17 Transient softening at the fusion boundary in resistance spot welded ultra high strengths steel 22MNB5 and its impact on fracture processes, O. Sherepenko, S. Jutner (Germany)

13) III-1792-17 Simulation of resistance spot welding process for the aluminum alloys 5182 and 6016 taking into account the surface layer, S. Heilmann, D. Koerlin, M. Merx, J. Muler, J. Zschetzshe, S. Ihlenfeldt, U. Fusel (Germany)

14)  III-1805-17 Comparison between fatigue properties of RSW and RSW bonded joints for automotive applications, M. Pedemonte, M. Palombo, G. L. Cosso and M. Rinosi (Italy)

15)  III-1796-17 Heat development of the contact area during capacitor discharge welding, M.-M. Ketzel, J. Zschetzshe (Germany)

16)  III-1797-17 Life-time increase of resistance spot welding electrodes by using wear-dependent milling intervals and dispersion hardened copper, D. Koerlin, C. Mathiszik, O. Sherepenko, S. Heilmann, J. Zschetzshe, S. Jutner, U. Fusel (Germany)

17) III-1798-17 Influencing factors for NDT of spot welds by imaging analysis of the residual flux density, C. Mathiszik, D. Köberlin. J. Zschetzshe, U. Füssel (Germany)

18) SC-Auto-88-17 Mechanical Properties of Repair Welded Joints for Automobile Body Structures, J. Ditter (Germany)

19) SC-Auto-89-17 Innovative Joining Technologies for Multi Material Applications with High-Manganese Steels in Lightweight Car Body Structures, M. Ivanjko (Germany)

20) SC-Auto-90-17 Susceptibility of electrolytically galvanized dual phase steel sheets to liquid metal embrittlement during resistance spot welding, J. Frei (Germany)

21) SC-Auto-91-17 Al-Si coating influence on the solidification and properties of laser-welded 22MnB5 steel joints, L. Wenhu (China)

22) SC-Auto-92-17 Probing joint strength and distortion in an advanced gas metal arc joining of dissimilar materials between aluminium and steel sheets, S. Goecke (Germany)

23) III-1843-17 Developing Resistance Spot Welding Processes for Joining 6XXX Aluminum Alloys to Zinc Coated Steels, B. Carlson (USA)

24) III-1807-17 Modelling and Experimental Validation of Friction Self- Piercing Riveting Aluminum Alloy to Magnesium Alloy, Y-W. Ma, M. Lou, Y.- B. Li, and Z.-Q. Lin (China)

25) III-1839-17 Influence of acoustic softening on the process characteristics in ultrasonic vibration enhanced FSW, C. S. Wu, L. Shi, Y. B. Zhong (China)

26) III-1831-17 Effect of hook defects and residual stress on the fatigue behaviour of the friction spot welded 6061-T6 alloy, J.Y. Cao, M. Wang, L. Kong, T. Yuan (China)

27) III-1837-17 Mechanism of liquid metal embrittlement cracking in a resistance spot weld of galvanized ultra high strength steel sheets, K. Taniguchi, C. Sawanishi, K. Takashima, H. Matsuda, R. Ikeda (Japan)

28) III-1799-17 Application of hybrid friction stir channeling (HFSC) technique to improve the cooling efficiency of electronic components, H. Karvinen, D. Nordal, P. Vilaça (Finland)

29) III-1813-17 Understanding the formation of ‘kissing bond’ defects in friction stir welds, G. Chen, H. Li, S. Zhang, Y. Zhu and Q. Sh (China)

30) III-1810-17 Microstructures and mechanical properties of friction plug welds repairing for AA2219-T87 friction stir welded joints, K. Liu, Z. Sun, X. Yang, B. Dua and J. Song (China)

31) III-1811-17 Effects of welding parameters on microstructure and mechanical properties of underwater wet friction taper plug welded API X52 pipeline steel, J. Xiong, X. Yang, W. Lin and K. Liu (China)

32) III-1812-17 Effect of pin thread on the material flow behaviours during friction stir welding: a Computational Fluid Dynamics study, G. Chen, S. Zhang, Y. Zhu, Q. Shi (China)

33) III-1822-17 Underwater friction stir welding of arc welded carbon steel J. P. Bergmann and J. Liefeith (Germany)

34) III-1817-17 Study on microstructure evolution of AISI 304 stainless steel joined by rotary friction welding, G. Wang, J. Li, J. Xiong, W. Zhou, F. Zhang (China)

35) III-1821-17 Discussion on questions of Friction Stir Welding, Z. Wang (China)

36) III-1814-17 Increase of tool life of friction stir welding tools by laser implantation of ceramic particles into the boundary layer of the tool, S. Schudekopf, G. Mienert, S. Bohm (Germany)

37) III-1833-17 Simultaneous Double Sided Friction Stir Welding of Thick Section Aluminium Alloys, J.P. Martin (UK)

38) III-1832-17 Friction Stir Welding of ODS Alloys and RAFM Steels, Z. Feng, W. Tang, X. Yu, and D. Hoelzer (USA)

39) III-1824-17 Hybrid friction stir processing with active cooling approach to achieve low temperature superplasticity in AA7075 alloy, V.V. Patel, V. Badheka (India)

40) III-1825-17 Effect of processing temperatures on the properties of high strength steel welded by FSW, G. Sorger, T. Sarikka, P. Vilaça, T.G. Santos (Finland)

41) III-1828-17 Global and local constitutive behaviours of friction stir welded AA2024 joints, P. Niu, W.  Li, Z. Zhang, X. Yang (China)

42) III-1826-17 The corona bond response to normal stress distribution during the process of rotary  friction welding F. Jin, J. Li, H. Li, Z. Liao, X. Li, J. Xiong (China)

43) III-1827-17 Effect of rotation speed on friction behaviour of rotary friction welding of aluminium alloy, X. Li, J. Li, Z. Liao, F. Jin, X. Nan, J. Xiong (China)

44) III-1808-17 Wavelet Analysis based Splashing Identification in Electrode Pressure Sensing of ervo-orch Resistance Spot Welding, N. Wu, J. Xiao, S. Chen (China)

45) III-1820-17 An experimental study on contact resistance of coated galvanized steel sheet, B. Yefeng, R. Ling, Y. Zhongtai, J. Yongfeng and Yangke (China)

46) III-1803-17 Evaluation of joint formation and mechanical performance of AA7075-T6/CFRP spot joints produced by frictional heat, N. Manente, J. F. dos Santos, S.T. Amancio-Filho (Germany)

47) III-1818-17 Mechanism of ABS polymer and Steel/Aluminum Joining by Resistance Spot Welding, C. Zhang, S. Jin, L. Yang, X. Liu (China)

48) III-1816-17 Durability of metal – composite friction spot joints under environmental conditions, S.M. Goushegir, J.F. dos Santos, S.T. Amancio-Filho (Germany)

49) III-1845-17 The influence of the clamping pressure on the joint formation and mechanical erformance of friction-riveted woven-reinforced polymer composite joints, N. Z. Borba, J.F. dos Santos, S.T. Amancio-Filho (Germany)

50) III-1840-17 Investigations on bubble formation, flow field and melting/solidification process in laser- based joining of metals to plastics, Schricker, K.; Bergmann, J. P. (Germany)

51) III-1841-17 Single side resistance spot joining of polymer-metal-hybrid structures, Schricker, K.,  Bielenin, M., Szallies, K., Bergmann, J. P. and Neudel, C. (Germany)

52) III-1842-17 Thermal joining of thermoplastics to metals: Surface preparation of steels based on laser radiation and tungsten inert gas arc, Schricker, K., Kohl, M.-L., Bergmann, J. P., Lohse, M., Hertel, M., Füssel, U. (Germany)

53) III-1806-17 Effect of electrode material on spot welding and electrode failure mechanism of hot-dip galvanized high strength steel, J. Yaoyao, Z. Wu, C. Changjin, L. Yonggang (China)

54) III-1838-17 Effects of electrode shape on temperature distribution of resistance sport welds, M. Iyota, Y. Taguchi (Japan)

55) III-1846-17 Plenary Session WG III-S Standardisation, K. Matsuyama

56) III-1834-17 International standardisation works of C-III 2017, K. Matsuyama (Japan)

57) III-1835-17 How to develop the Annex A of ISO 14273, K. Matsuyama (Japan)